Description

The portable mass-flow Controller (MF-1000) has been developed to ensure the use of SF6 gas is accurately controlled and monitored. SF6 gas is an expensive commodity which can also have a major environmental impact when released into the atmosphere. Governments worldwide are introducing legislation, such as EC842/2006, to control the use of this gas and limit leaks from the equipment in which it’s used as an insulating medium. Therefore accurate measurement and control of SF6 usage, is essential.

The MF-1000 is a fully automatic portable mass-flow controller which can monitor and record how much gas is being used during both “fill” and “top-up” operations. The key features and accuracy of this instrument offer a major step forward in the handling of SF6 gas within the electricity market.

Features

• Unit available in two formats: 15kg/hr for “top-up” and 50kg/hr for “fill” operations.
• Ease-of-use – designed for use by plant engineers and fitters. Does not require specialist personnel, or contain any consumable chemical solutions.
• Automatic data-logging for full traceability.
• Battery operated, using rechargeable batteries, giving up to 5 hours operation, enables full-portability.
• There is also the facility to operate the unit from a mains power supply.
• Fully automatic operation, just set the parameters, press ”GO” and the unit will fill the plant equipment with the correct amount of gas at the required pressure, before shutting-down.
• Audible alarm for “failure” or “finish” operations.
• Protective IP67 Case.

Specifications

Flow Ranges: 0.5 to 15kg/hr or 2 to 50 kg/hr

Gas Pressure: 500psig maximum, Burst Tested to 750psig

Accuracy: Std Calibration ±1% of full scale at operating conditions High Accuracy Calibration ± 0.7% of reading plus 0.3% of full scale at operating conditions

Repeatability: ± 0.2% of scale

Temperature Coefficient: ± 0.025% of full scale per ºF

Pressure Coefficient: ± 0.01% of full scale per psi

Response Time: 300 milli-second time constant: 2 seconds (typical) to within ±2% of final value (includes setting time)

Gas & Ambient Temperature: 0ºC to 50ºC

Application

Precise control and monitor filling process of all types of SF6 electrical equipments.